sdferer

If we do not properly maintain filling machine, PET bottle Mold will reduce the service life of filling machine. In order to make our filling machine is in good working condition, we should pay attention to machine maintenance in these areas.
1. Daily maintenance methods < br > Every day before turning to emphatically examine whether there is plastic bottle making machine a problem such as the power of the filling machine, mainly check whether have insulation damage power cable head fell out and after confirm these places have no problem in the running equipment, this is not only for filling machine maintenance is also considering the safety of the operator itself. In a timely manner to add lubricant, make flexible machine, reduce machine wear.
Repair and maintenance of equipment health work, material contact part of health.
At work to the operator to pay attention PET blow moulding machine to the motor in operation of any noise or running is not smooth, if there is one stop working to start some troubleshooting, then ending began to work again after failure. Every once in a while for the motor on a bit of lubricating oil, if the day"s work for a long time, the time interval to a little bit small.
Haven"t use this machine. After use, the machine should be clean, in order to avoid some residual material corrosion machine. Then coated with anti-rust oil on the machine and covered with a cloth.
2. The summer maintenance skills < br > Equipment used infrequently, after each use need to seal, to prevent the occurrence of impurities next time when used.
There was a noise, the machine run may be out of gear oil or gear misalignment, need to repair in time.