sdferer

The popularity of mechanization to replace the work of many people, Edible oil filling machine filling machine is a very typical example. Filling machine structure is simple, but the efficiency is higher, and species also has a lot of, suitable for different industries, to know about the below!
1. Normal pressure filling machine < br > Liquid products under ordinary conditions of loading container, only apply to the filling of low viscosity, no gas liquid products, such as wine, vinegar, soy sauce, etc.
Mainly by the tank into the bottle, the bottle, bottle feeding conveyor, filling valve, the main shaft and transmission system. In the same horizontal plane into the wheel and the wheel, tray installed on the lifting lever, spindle vertical installed on the bearing seat, the top 1 is installed on the spindle, 24 refill valve under the tank. Corresponding 24 tray, in the middle of lifting movement by the track. Motor and drive system device installed inside a frame.
2. The negative pressure filling machine < br > First container form negative pressure pump, Vegetable oil filling machine then put the liquid products into the container. Negative pressure filling machine is divided into two kinds, one kind of positive pressure storage tank, the negative pressure container, rely on differential pressure filling (differential pressure filling machine); Another tank and container are negative pressure, depending on the liquid from filling (gravity type negative pressure filling machine).
Suitable for filling juice, toxic pesticides and chemical reagents.
3. Pressure filling machine < br > The liquid filling the container CSD filling line with external mechanical stress.
Suitable for filling viscous material, the fluid. Such as toothpaste, tomato sauce, bean paste, balsam, etc.
Seasoning made from stainless steel box 1. Welding boxes at the bottom of form, and at the bottom of shaft rigidity connection. At the bottom of the box body are 12 piston, piston rod bottom roller, roller along the circular orbit, control the reciprocating movement of the piston. Rail end is equipped with lifting gear, used to adjust the piston stroke. 12 filling valve installed in the paste box outside, connected to the paste box.